A fixed length of the profile is used for the casing and sealing of the window opening.

By choosing a product with a corresponding bending radius, the fixed lengths closely cases the corners. Both ends are either pushed close or sometimes
glued together.

Support:
EPDM soft rubber
70±5 Shore A
with wire carrier

Sealing:
EPDM sponge rubber
0,55±0,5 g/cm³
mounting/tear force:
min. 80N
Compression force of the tube 12±3 N

Color: black

In this instance the profile's material is EPDM and it is used as a door sealing.

Support:
EPDM soft rubber
60±5 Shore A

with wire carrier

Sealing:
EPDM soft rubber
0,55±0,5 g/cm³

Color: black

Support and tube are made of NBR because of its good resistance to lubricants contrary to EPDM.

In this case its resistance of NBR to fuel and solvents are a major advantage, too.

Especially the motor has to be treated with detergents which a profile from EPDM would not survive.

Support:
NBR

with wire carrier

Sealing:
NBR
Color: black

In this case support and tube are made of NBR because of its good resistance to lubricants contrary to EPDM.

Support:
Soft PVC or NBR

with wire carrier

Sealing:
EPDM soft rubber or NBR

Color: black

The geometry of this profile was discussed with the manufacturer of the electric cabinet before the final design.

The sealing is designed in a way to allow the vehicle to be cleaned with high-pressure water and still remain splash-proof.

Support:
EPDM soft rubber
70±5 Shore A

with wire carrier

Sealing:
EPDM sponge rubber
0,55±0,05 g/cm³

Color: black

It is used for free mounting of window panes.

From this section we manufacture frames or rings by means of Normec vulcanising or bonding. Precise corners can be manufactured by injection-moulding.

We also manufacture glass run channels with flock for sliding windows.

Material:
EPDM
65±5 Shore A

Color: black

Serves as protection against injuries and enhances the appearance
of the product.

Material:
PVC

with wire carrier

Color: black
(also available in white
and silver)